The Daily Maintenance Of Non-woven Machinery
The Daily Maintenance Of Non-woven Machinery
1.Neatly:
a) The raw materials are stacked neatly.
b) Maintenance tools and spare parts are placed in the tool box.
c) The plastic turnover baskets are stacked neatly and sanitary appliances are placed neatly in the designated positions.
d) It is forbidden to place flammable materials. It is forbidden to place tools and accessories on the machine table.
e) The spare parts should be kept clean, oiled and rust proofed and stored neatly at the designated location.
f) The equipment parts are in good condition.
2. Cleaning
a) Before cleaning the product, clean the product contact surface of the production line to be clean and free of debris.
b) The appearance and surrounding area are clean and free of debris and oil.
c) The back transmission chamber cleans the body surface, the straight gear box, the differential gear, and the synchronous wheel.
d) The outer surface of the machine platform shall be cleaned, cleaned and underneath the machine table, and the foot of the window sills shall be wiped.
e) The electronic control device should be kept clean and intact.
3. Lubrication
a) The cutters, counter-cutting cylinders, and linoleum should be kept moist and add oil in time.
b) Check the lubrication condition of the chain and lubricate the deficiencies.
c) Check the main bearing for good lubrication and high temperature or abnormal sound.
d) Only use water and alcohol when scrubbing rubber parts, plastic parts, and paint parts.
4. Security
a) Abnormal sound during production line operation and timely shutdown adjustment.
b) Each belt and timing belt are in normal operation.
c) Adjust the cutters inside and outside.
d) Periodic inspection of the electrical equipment operating conditions.
e) At any time to inspect electronic control cabinets, electronic control units on the operation table, various motors, and solenoid valves.
f) Observe the work of each part frequently. If any abnormality is found, it shall be stopped and overhauled immediately.
g) The complete machine has no failure parts.