What is the correct way to use adhesion promoter?
In daily life, people often use tape. There are many types of tape now, but no matter which one, there is adhesion promoter on it. In fact, adhesion promoter is widely used in both industry and life. Adhesive can be used for glass, metal, rubber, plastic and other materials, which can make the materials stick more firmly.
I. How to use adhesion promoter:
1. Clean the place to be pasted, make sure the surface is dust-free, water-free and oil-free. It is recommended to wipe it with alcohol or high-concentration liquor.
2. Unscrew the bottle cap with a brush and do not dip too much liquid on the brush.
3. Because this product is very volatile, please press the bottle mouth tightly after taking out the brush.
4. Use a brush to apply the adhesive to the part where you need to stick something. Let it dry for 1-2 minutes before sticking.
5. Uncover the red paper tape and stick it to the place you want to stick.
6. Use a small roller to roll the double-sided adhesive forcefully to ensure a tighter adhesion.
II. Notes on adhesion promoter:
1. Before applying, please test this product in a small area to see if it reacts chemically with the object to be applied. However, it does not produce chemical reactions on surfaces such as car paint, plastic, glass, and metal, so please use it with confidence.
2. Adhesion promoter is a highly volatile 3M base glue, so be sure to pay attention to the sealing when using it. It is best to press the bottle mouth tightly immediately after taking out the brush. Tighten the bottle cap after use!!
3. The adhesion promoter has a certain viscosity in the initial state.
4. The adhesion promoter is not a cleaning fluid, please do not use it incorrectly. Children cannot use it! Do not contact the eyes and skin. If accidentally contacted, wash it with water immediately. Go to the hospital for treatment immediately if it is serious.