Common Problems And Solutions Of Nonwoven Fabric Slitting Machine
During the use of the non-woven slitting machine, the following problems may occur:
1. The nonwoven fabric slitting machine winds up unevenly. Most of this situation is because the paper core is not applicable. As long as the paper core with the required inner diameter is replaced, and the winding pressure roller is used in the winding process, uneven winding can also be avoided.
2. The nonwoven fabric slitting machine is rolled up and wrinkled. This is mainly because the winding tension is wrong. Adjust the appropriate winding tension of the non-woven slitting machine. Use a pressure roller for winding and press the slitting material into the winding paper core.
3. The meter count is not accurate. In this case, the two wheels of the meter wheel can be contacted with the feeding rubber roller at the same time, and a mark can be made on the meter wheel, or the meter wheel can be replaced.