How to adjust the cutting point of the nonwoven sheeting machine
How to adjust the cutting point of the nonwoven sheeting machine mainly includes the following parts:
1. After the cutter die setting work of the nonwoven sheeting machine is completed, put the material to be cut on the rubber roller, then put the cutter die on the material, and then push the feed plate into the cutting area.
2. Press the cutting switch of the nonwoven sheeting machine with both hands, and the cutting pressure plate will be lowered and pressurized on the knife die. After the knife die cuts the material, it will automatically return to the pneumatic front position and stop.
3. When cutting materials on the non-woven cross-cutting machine, if the materials are not cut, adjust the cutting depth controller to rotate the "pressure system" clockwise and counterclockwise. If the mold is pressed into the rubber sheet too deeply, turn the "pressure system" counterclockwise.
4. Pull the feeding plate out of the cutting area, take out the cut materials, and complete the blanking process.